A Guide to Assessment Validation: Validating Assessments in Practice
A Guide to Assessment Validation: Validating Assessments in Practice
Blog Article
After gaining registration, RTOs need to monitor several aspects including annual declarations, AVETMISS reporting, and marketing compliance, with validation being a major concern.
Even though we’ve written about validation several times, let's revisit its definition. ASQA calls validation a quality review of the assessment process.
In essence, validation confirms which parts of an RTO's assessment process are correct and pinpoints elements for improvement. With a solid grasp of its key components, validation becomes manageable.
According to SRTOs 2015 Clause 1.8, RTOs must ensure that their assessment systems, including RPL, comply with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
We must adhere to the standards by conducting two types of validation.
The first kind of assessment validation ensures your RTO's assessment adheres to the training package requirements within your scope.
The second kind of validation ensures assessments are carried out in accordance with the principles of assessment and rules of evidence.
Thus, validation is performed both prior to and following the assessment. The first type, assessment tool validation, is the focus here.
Understanding the Two Types of Assessment Validation
Clarifying Assessment Validation
As mentioned earlier and in one of our previous blog posts, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, often referred to as pre-assessment validation or verification, deals with ensuring all unit requirements are addressed as per the first part of the clause, ensuring complete workbook compliance.
On the other side, post-assessment validation pertains to the implementation, requiring Registered Training Organisations to adhere to the Principles of Assessment and Rules of Evidence.
For this piece, our emphasis will be on assessment tool validation.
How to Conduct Assessment Tool Validation
With a grasp of the two validation types, let’s focus on assessment tool validation.
Best Times to Conduct Assessment Tool Validation
Assessment tool validation is intended to confirm that all elements, performance criteria, and performance and knowledge evidence are met by your assessment tools.
This means that whenever new learning resources are acquired, assessment tool validation must be performed before they are used by students.
You don’t need to wait until your next 5-year validation schedule. Immediately validate new resources to ensure they’re ready for student use.
Nevertheless, this isn't the only occasion for this type of validation. Conduct assessment tool validation when you:
- update your resources
- add new training products on scope
- course gets reviewed against training product updates
- you identify your learning resources as a risk during your risk assessment
The Australian Skills Quality Authority's risk-based approach means RTOs should carry out regular risk assessments. If students complain about learning resources, it's an ideal time for assessment tool validation.
How to Choose Training Products for Validation
Recall, this type of validation aims to ensure all learning resources are compliant before use. All RTOs must validate each unit's resources.
Resources Required for Assessment Tool Validation
Learning Materials
As you validate your assessment tools, you will need the complete set of your learning resources:
Mapping tool – start by investigating this document. It shows which assessment items meet unit requirements, facilitating quicker validation.
Learner/student workbook – ensure it's appropriate for use as an assessment tool. Check if instructions are clear and answer fields are sufficient. This is a frequent gap.
Assessor guide/marking guide – check that instructions for assessors are adequate and that there are clear benchmarks for each assessment item. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – could include checklists, registers, and templates developed apart from the workbook and marking guide. Validate them to confirm they fit the assessment task and meet unit requirements.
Validation Panel
Clause 1.11 details the requirements for validation panel members, noting that validation can be conducted by one or more people. Generally, RTOs require participation from all trainers and assessors and may include industry experts.
As a whole, your validation panel must have:
Current vocational competencies and relevant industry skills for the unit being validated
Current knowledge and skills in vocational teaching and learning
One of the following training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or its updated version
Assessment validation tool/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool supports the validation process and documentation. It simplifies understanding how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that website you have validated your resources before letting the students use them.
It also acts as evidence that you have validated your resources prior to student use.
Although ASQA does not recommend or require a particular template for assessment tool validation, many templates are accessible online. These tools typically have validators examine the tools in their entirety to determine if they meet the principles of assessment.
Assessment Principles Checklist Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.
A more detailed template is recommended to thoroughly inspect each unit requirement and the assessment items that align with them. Below is an example:
Element Performance Criteria Instructions for Assessment Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Needs Checking?
As stated in our blog post Common Problems In Assessment Tools, you must ensure your assessment tools allow trainers to adhere to assessment principles and evidence rules.
Assessment Principles
Fairness – Are equal opportunities and access ensured in the assessment process?
Flexibility – Does the assessment offer multiple ways to show competence according to different needs and preferences?
Validity – Does the assessment evaluate what it is meant to evaluate? Is it a valid tool for measuring the required skill or knowledge?
Reliability – Will the assessment achieve the same results every time, regardless of who conducts the training? Will different assessors consistently make decisions on skill competence?
Fundamental Rules of Evidence
Validity – Does the evidence show the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to ensure the learner has the required skills and knowledge?
Authenticity – Is the assessment tool ensuring that the work is the candidate’s own?
Currency – Are the assessment tools updated to reflect current units of competency and industry practices?
Even though these are regularly addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.
To prevent using learning resources that fail to address some unit requirements, ensure you follow these guidelines:
Follow Through with Actions
Observe the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Carry out each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:
changing diapers
prepare bottles, bottle feed infants, and clean equipment
prepare solid foods and feed infants
appropriately respond to baby signs and cues
prepare babies for sleep and soothe them
monitor and promote age-appropriate physical exploration and gross motor skills
Having students describe changing nappies for babies under 12 months doesn’t directly fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Look Out for Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t suffice.
Complete or Not Competent
Mind the lists. Again, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Clarify Further
Each assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions are not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What information might be included in a work package?
Answers may include:
Necessary resources
Relevant expenses
Time assigned for activities
Appointed roles and responsibilities
If an assessment item demands multiple answers, specify how many answers a student must provide. This ensures your assessment is reliable, and the evidence gathered is valid.
The same applies to assessment items with double-barrelled questions or those that ask for multiple answers simultaneously. Such questions can confuse both students and assessors, as illustrated in the example below:
Identify a hazard and/or environmental concern in the workplace and select the most effective hazard control hierarchy.
Answers may include, but are not necessarily limited to:
Weather conditions – work area isolation, engineering controls, PPE
Work area and ground conditions – eliminating hazards, isolating, engineering
People – isolating, engineering, administration
Structural hazards – substitution, isolating, engineering controls
Chemical hazards – isolating, engineering, administration
Equipment or machinery – isolation, engineering controls, administration
Steering clear of double-barrelled questions makes it easier for students to answer and for assessors to accurately judge student competence.
Considering these requirements, you might wonder, “Don’t learning resource developers have audit guarantees?” But these guarantees mean you have to wait for an audit to rectify noncompliance. This impacts your compliance history, so it’s wiser to take a safe and compliant approach.